Tucson Epoxy Co. is an epoxy flooring contractor serving homeowners and businesses across Pima County. We install garage floor epoxy, concrete floor coatings, and polyaspartic floor coatings for spaces exposed to Tucson's heat and dust. Our work also includes commercial and industrial epoxy flooring, flake and metallic finishes, patio and pool deck coatings, and concrete repair resurfacing. Every system is selected for the slab's actual condition, traffic, and sun exposure.
Tucson summers can push exposed concrete slabs past 140 degrees, while caliche-heavy soils shift and expand during monsoon season. UV index readings regularly exceed 10 in summer, adding another source of stress for untreated concrete and coatings. Those conditions show up as cracks, pitting, hot-tire pickup, oil stains, and mineral deposits. We address the slab first, then choose a coating build for the traffic, moisture, chemicals, and sunlight the surface will face.
We're a licensed epoxy contractor in Tucson with an active Arizona Registrar of Contractors license and full general liability insurance on every crew. Our installers follow ICRI surface preparation standards and use ASTM D4541 pull-off adhesion testing to confirm bond strength before coating. We've coated garage floors in Oro Valley, warehouse floors in South Tucson's industrial corridor, and pool decks in the Catalina Foothills. That range helps us account for changing elevation, soil composition, and sun exposure across the valley.
Sonoran Desert concrete endures extreme surface heat, direct UV exposure, and monsoon moisture. We select epoxy or polyaspartic builds for the slab's location and intended traffic instead of treating the coating like ordinary paint.
Mechanical diamond grinding or shot-blasting opens the concrete pore structure to an ICRI CSP-3 profile. Moisture testing is used where slab-on-grade conditions warrant it, and ASTM D4541 pull-off testing confirms bond strength before the coating goes down.
Garages, storefronts, offices, warehouses, factories, patios, and pool decks all ask something different of a floor. We account for vehicle traffic, rolling loads, cleaning chemicals, wet areas, and operating schedules when planning the coating build.
We choose coating chemistry and thickness around each exposure: UV-stable polyaspartic topcoats for sun, slip-resistant aggregate for wet areas, and thicker broadcast or trowel-down systems for demanding commercial and industrial floors. Warehouse systems sometimes exceed 30 mils where forklift traffic, pallet jacks, and point loads require it. With proper surface preparation and a UV-stable topcoat, a concrete coating system typically lasts 10 to 20 years indoors and 8 to 15 years in UV-exposed outdoor applications, depending on traffic and maintenance.
Cracks are filled with semi-rigid epoxy, spalled areas are patched with polymer-modified overlays, and the slab is ground to a uniform CSP profile before coating. A typical residential garage installation runs two days, while some smaller garages can use one-day options when slab conditions allow. Roughly a third of premature coating failures we've been called to inspect trace back to inadequate surface preparation or moisture issues that were not addressed.